Room Cameras:

There are two cameras located at the top of the columns in the front of the room. Use the Logitech remote pictured below (usually found on top of the side cabinet) to control them.

To use the remote, point it at the camera that you want to control and use the arrows to adjust where it’s pointing. You can also use the numbered buttons to turn on preset camera positions.

Camera closer to the entrance:

1- Points to the desk

2- Points to the podium

3- Points to the audience

Camera further from the entrance:

1- Points to the audience

2- Points to the front of the room

3- Points at the entrance to the room

Room Microphones:

The room mics are the rectangular panels in the ceiling that are used to pick up audio from anyone in the room. They are used when the room participants are in a Zoom call, so that the remote participants can hear what’s going on.

When the room mics are off, the two lights will be red. When they are turned, the lights will turn blue. When the system is powered on, they default to off.

Wireless Microphones:

Wireless mics are located on the top of the side cabinet. When using the wireless mics, please remember to turn the battery pack for the mic on and off.

You do not need to raise the volume on the mic so that you are able to hear yourself through the system. Generally, if you can hear yourself; the volume needs to be lowered. Instead, turn on the mic and check with the participants in back to see if the volume needs to be adjusted.

The wireless mic often runs low on battery power. Nine-volt batteries are available for replacement on the cabinet underneath the monitor in the top shelve. If we run out, please stop by the front office to get more.